2000 Lt, 2500 Lt, 3000 Lt / 4000 Lt, 5000 Lt, 6000 Lt, 8000 Lt, 10000 Lt,12000 Lt, 16000 Lt, 20000 Lt, 25000 Lt
- AISI 304 quality stainless steel
- The first wall base is 2 mm and 0.8 mm Ep type laser welded cooling evaporator surface is coupled to the wall.
- The isolated wall is 1,5 mm in tanks with a capacity of 2000-3000 Lt and 2 mm in tanks with a capacity of 4000-25000 Lt.
- Cooling unit, tank body is mounted on one-piece chassis.
- One 0,34 HP, 33 rpm reducer and a stainless steel agitator blade connected to it are available. There are 2 mixers from 2000 Lt to 12000 Lt, 3 mixers from 16000 Lt to 20000 Lt and 4 mixers in 25000 Lt milk cooling tanks.
- The insulation thickness is 60 mm and made of HCFC-free water-based high-density polyurethane foam material.
- Product outlet has a DN50 male union butterfly valve.
- AISI 304 stainless steel Ø 500 mm manhole cover is available on top.
- There is Ø 100 mm product inlet on the manhole cover.
- A Ø 90 ventilation grille is available on top.
- Manual measuring scale with calculation table with a precision ratio of 3-4% is available.
- It has AISI 304 quality steps to prevent slipping.
- It is designed so that zero liquid remains inside during the discharge.
- Welded areas are 1st class Argon TIG welding and 1st class smooth polished.
- Adjustable bolt feet are available on the bottom.
- Fast and frost-free cooling according to minimum milk quantity
- Minimum amount of gas charge
- A 404 gas cooled
- Milk Cooling Tanks provide the possibility of cooling each milking (32 °C – 38 °C) from 35 °C to 4 °C at ambient temperature.
- The compressor has a solenoid valve, expansion valve, drier, sight glass, liquid retainer and valves.
- Direct cooling system
- Certificate of conformity to TSE 13732/CE/EAC standard
- Test compliance report
- Optional designs for 2-line, 4-line and 6-line milking systems available.
- Electrical panels with protection class IP 65
- It has the capability of operating with 380 volt energy.
- Temperature display with digital thermometer
- Special designed, easy to use electronic control card to control the tank operation, milk temperature, electronic milk measurement, washing system and menus.
- In the event of failure of the electronic system, the cooling process can be continued by putting it into the manual position.
- There is an additional electromechanical safety system set to 1.5-2 °C to prevent milk from freezing.
- In case of any faults, an error message about the fault is given.
- In multi-system compressors, the compressors are gradually activated to prevent sudden drawing of current.
- It is possible to see malfunctions, washing temperatures, milk temperatures and electrical failures that have occurred in the last 20 days.
- Phase protection relay
- Automatic mixing program with special software; after the milk reaches the desired set value, the operating time of the mixer can be adjusted in the desired intervals. (3 minutes operation and 10 minutes stop)
- Thanks to the specially designed CIP ball, water penetration is provided to the entire surface.
- Automatic washing capability with one button
- Low detergent consumption
- Easy to use detergent container
- Safety system preventing water from entering the milk
Digital Level Indicator
- It has the possibility of measuring with 0-2% error margin.
- The amount of milk in the tank can be monitored from the control panel.
- The amount of milk in the tank can be displayed in mm, kg and Lt.
- Automatic detergent dosing pump
- Notification of faults to the mobile phone as a message
- Heat recovery tank
|Capacity||Min. Amount of Milk||Compressor||Reducer||Fan||Total Consumption||Generator Power||Class|
|2.000 LT||300 LT||6,3 Kw / 7 HP Scroll Compressor||0,51 KW||Ø 450 X 2 Pieces 0,25 Kw x 2 Pieces||7,31 Kw||15 Kw||2BII|
|2.500 LT||350 LT||6,3 Kw / 7 HP Scroll Compressor||0,51 KW||Ø 450 X 2 Pieces 0,25 Kw x 2 Pieces||7,31 Kw||15 Kw||2BIII|
|3.000 LT DOUBLE GROUP||400 LT||4,95 Kw x 2 Pieces 5 HP X 2 Pieces Scroll Compressor||0,51 KW||Ø 400 X 2 Pieces 0,18 Kw x 2 Pieces||10,77 Kw||22 Kw||2BI|
|3.000 LT SINGLE GROUP||400 LT||7,75 Kw / 8 HP Scroll Compressor||0,51 KW||Ø 500 X 2 Pieces 0,35 Kw x 2 Pieces||8,96 Kw||18 Kw||2BII|
|4.000 LT||400 LT||6,3 Kw x 2 Pieces 7 HP X 2 Pieces Scroll Compressor||0,51 KW||Ø 450 X 4 Pieces 0,25 Kw x 4 Pieces||14,11 Kw||30 Kw||2BII|
|5.000 LT||500 LT||6,3 Kw x 2 Pieces 7 HP X 2 Pieces Scroll Compressor||0,51 KW||Ø 450 X 4 Pieces 0,25 Kw x 4 Pieces||14,11 Kw||30 Kw||2BIII|
|5.000 LT||500 LT||7,75 Kw x 2 Pieces 8 HP X 2 Pieces Scroll Compressor||0,51 KW||Ø 500 X 4 Pieces 0,35 Kw x 4 Pieces||17,41 Kw||35 Kw||2BII|
|6.000 LT||600 LT||7,75 Kw x 2 Pieces 8 HP X 2 Pieces Scroll Compressor||0,51 Kw x 2 Pieces||Ø 500 X 4 Pieces 0,35 Kw x 4 Pieces||17,41 Kw||35 Kw||2BII|
|6.000 LT||600 LT||9,35 Kw x 2 Pieces 10 HP X 2 Pieces Scroll Compressor||0,51 Kw x 2 Pieces||Ø 500 X 4 Pieces 0,35 Kw x 4 Pieces||21,12 Kw||45 Kw||2BII|
|8.000 LT||850 LT||11,3 Kw x 2 Pieces 12 HP X 2 Pieces Scroll Compressor||0,51 Kw x 2 Pieces||Ø 500 X 4 Pieces 0,35 Kw x 4 Pieces||25,02 Kw||50 Kw||2BII|
|10.000 LT||1000 LT||11,3 Kw x 2 Pieces 9,35 Kw x 1 Pieces 12 HP X 2 Pieces 10 HP 1 Pieces Scroll compressor||0,51 Kw x 2 Pieces||Ø 500 X 6 Pieces 0,35 Kw x 6 Pieces||35,07 Kw||70 Kw||2BII|
|12.000 LT||1100 LT||11,3 Kw x 3 Pieces 12 HP X 3 Pieces Scroll Compressor||0,51 Kw x 2 Pieces||Ø 500 X 6 Pieces 0,35 Kw x 6 Pieces||37,02 Kw||75 Kw||2BII|
|16000 LT||2000 LT||12,7×3 Pieces = 38,1 kw 15 HP 3 Pieces Scroll||0,51 Kw x 3 Pieces||0,69×6 Pieces = 4,14 kw||43,77 Kw||75 Kw||2 B II|
|20000 LT||2000 LT||12,7×2 Pieces = 11,3*2=48 Kw 15 Hp 4 Pieces Scroll||0,51 Kw x 4 Pieces||0,69×8 Pieces = 5,52 kw||55,06 Kw||90 Kw||2 B II|
|25000 LT||2500 LT||12,7×4 Pieces = 50,8 kw 15 Hp 4 Pieces Scroll||0,51 Kw x 4 Pieces||0,69×8 Pieces = 5,52 kw||57,85 Kw||90 Kw||2 B II|
Note: Every technical details will change by the produce. Please ask us what you need before buying.